Texas Compressed Natural Gas (CNG) Delivery Truck Driver Practice Exam

These questions are part of the practice quiz. Start practicing

• What type of publications are provided to company representatives regarding CNG activities?
• What is the significance of legible lettering on CNG transport units?
• Where should CNG storage containers not connected for use be located?
• How high must the vertical supports for guardrails extend above the ground?
• What information must be included on the label at the fueling connection receptacle?
• What is the minimum distance that CNG equipment must be from important buildings?
• How should cylinders be marked according to regulations?
• Why is monitoring Maximum Operating Pressure critical for gas systems?
• Which term refers to definitions relevant to CNG activities?
• What does a licensee refer to in the context of CNG operations?
• Where should Pressure Relief Devices be located in relation to temperature exposure?
• Compression, storage, and dispensing equipment must be located how far from electric power lines?
• Which type of CNG container is designed to store CNG for uses other than propelling the vehicle?
• What is a key feature of CNG vehicle cylinder valves?
• What type of storage system is used for storing multiple cylinders of CNG?
• What is the role of an individual designated as a Qualified Individual?
• Which requirement is needed for unattended CNG compression equipment?
• What is the primary requirement for piping and other apparatus within CNG systems?
• What is the required clearance between the railing and any part of CNG compression equipment?
• If an individual holds multiple certificates, what renewal fee do they pay?
• What occurs if the annual renewal fee is not paid by the deadline?
• What term is used to refer to a site operated by a CNG licensee for regulated activities?
• Under what condition will AFS not issue a CNG Form 1004?
• What is the gate requirement for fenced enclosures at CNG installations?
• What is the primary use of compressed natural gas (CNG)?
• What is a DOT "CT" number assigned to?
• What is required to be indicated by gauges or readout devices?
• Which document serves as the basis for employee certification in CNG activities?
• What ensures that gas does not escape from a ruptured line upstream of storage containers?
• What does CNG primarily consist of?
• Who may remove a warning tag attached by an inspector?
• Which section specifically outlines civil penalties in relation to CNG transport?
• What is the term for the operation of transport units using compressed natural gas?
• What must all CNG cargo tanks comply with?
• What is the purpose of a Stationary Tank?
• For what reason can penalties be reassessed based on previous violations?
• What must occur regarding subsequent examinations after a failure?
• What is the purpose of the CNG Form 1020?
• What is the definition of a pressure vessel?
• What is the primary concern regarding markings on container nameplates?
• What happens if a newly constructed CNG container is introduced with above the maximum testing limit?
• What is the role of the examination proctor?
• What must examinees do before the established time limit expires?
• Which component is essential for maintaining safety by venting excess pressure in CNG systems?
• What form must the licensee submit to AFS after making a telephonic report?
• Which component is often part of a CNG system?
• How many openings are allowed on each side of the horizontal guardrailing?
• What type of activity does the manufacturer registration allow?
• Where can fuel supply containers be located on vehicles?
• What does AFS do upon receiving the annual renewal and late filing fees?
• Under which condition may civil penalties be assessed according to Texas Natural Resources Code, §116.143?
• What is the maximum spacing allowed between strands of barbed wire on a fence top?
• Which term refers to all equipment involved in transferring CNG between containers?
• According to NFPA regulations, what conditions must regulators be protected against?
• What is the primary focus of Texas Natural Resources Code, §116.103?
• What is the format required for marking on CNG labels?
• What are regulatory documents that outline the requirements for CNG operations referred to as?
• Which standard specification should cast iron components comply with for use in CNG service?
• What does a warning tag indicate about CNG/LNG equipment?
• What is a method to prevent the accumulation of flammable liquids under containers?
• What type of system is responsible for the transfer of CNG between storage cylinders and vehicles?
• Which device converts LNG from liquid to gas by adding heat?
• What type of incident requires an operating facility to be taken out of service?
• What is the nonrefundable fee for the employee-level rules examination?
• What is the cost for printed copies of the Railroad Commission's regulations?
• How should the nameplate be attached to minimize corrosion?
• What requirement does the Texas Natural Resources Code, §116.072(a) enforce?
• Which form is used to transfer a currently registered unit?
• What should individuals do if they want to maintain their certification in CNG activities?
• Which of the following is NOT a requirement for CNG certification?
• What type of valve must be provided for each DOT or TC storage cylinder?
• What type of programs are crucial for the safe operation of CNG Delivery Truck Drivers?
• Which system is used specifically to dispense compressed natural gas into vehicles or containers?
• What term describes a system including various safety and operational devices intended for use in CNG applications?
• What type of test assesses understanding of laws and standards for CNG operations?
• What does Set Pressure refer to in a gas system?
• What document is necessary for a transport container to operate in CNG service?
• What type of relief may the attorney general seek against violators?
• Which of the following is true about examination failure?
• What type of hose does not require static protection if certain conditions are met?
• What does NFPA stand for in the context of natural gas safety?
• What should be done to protect areas where CNG equipment might be exposed to vehicular traffic?
• What is the regulatory framework for the safety of vehicles using compressed natural gas in the U.S.?
• How much clear space is required for access to valves and fittings of multiple container groups?
• When does AFS notify individuals about renewal deadlines?
• Which of the following best describes the applicability of the subchapter regarding CNG systems?
• What is the main purpose of the registration process with AFS?
• What must be maintained in safe operating condition according to manufacturers' instructions?
• Which part of the vehicle must also have clearance considerations similar to the fuel containers?
• What pressure limit should CNG cylinders not exceed during operation?
• What device controls and maintains a consistent outlet pressure?
• Which of the following is necessary for gaskets used in CNG systems?
• What type of incident must be reported to state or federal agencies?
• What is the restriction on combustible materials in relation to stationary containers?
• What is the Point of Transfer?
• What is a cylinder designed for use as part of a CNG system called?
• What responsibility does an operations supervisor have within CNG activities?
• What kind of inspection is required for CNG containers and piping systems?
• What is the function of an emergency shutoff valve?
• What is required for the testing of cylinders?
• Which type of CNG installation is not a single-family dwelling?
• What defines a CNG system that fuels an engine designed to move the vehicle?
• Which addendum specifically relates to the communications and venting aspect of Pressure Relief Devices?
• What does a fail-safe automatic closing valve do?
• Which document should CNG Delivery Truck Drivers refer to for current regulations?
• What is the maximum amount of CNG that can be introduced for transport to reach a destination?
• What is the primary purpose of the Texas Railroad Commission?
• In what context are written procedures critical in CNG operations?
• What is the purpose of a CNG transport container?
• What does successful completion refer to regarding CNG certification?
• What labeling requirements are there for vehicles equipped with a CNG fuel system?
• How should fueling hoses be treated while in transit on a cargo vehicle?
• Which type of valve is required for individual ASME pressure vessels?
• Who must supervise individuals performing CNG activities?
• What must be followed during the installation of CNG system components?
• Who is the individual designated to oversee the conduct of a licensee's CNG activities?
• In areas subject to flooding, what must be done to storage containers?
• Within how much time must a licensee notify AFS of an incident involving CNG?
• What is the designation for an individual who has not yet taken and passed an employee-level rules examination?
• What is a transport unit in the context of CNG?
• What does Operating Pressure refer to?
• What do the testing requirements for CNG cargo tanks aim to ensure?
• What is explicitly prohibited for pressure relief valves used in CNG service?
• What score is typically required to pass the applicable rules examination?
• What is a necessary design requirement for compression equipment used with CNG?
• What does the term "CNG" stand for?
• What must each motor vehicle equipped with a CNG or LNG cargo tank have?
• What is the qualification level required to take the Railroad Commission's qualifying examination for CNG operations?
• Who are considered Licensees in the CNG industry?
• Which device would NOT be considered a part of a pressure control system?
• What must AFS notify individuals about if not employed by a licensee?
• What type of licensee can determine if a transport is unsafe for CNG service?
• What is required at every dispensing point to protect against pullaway incidents?
• According to NFPA 52, what is a key consideration when setting up fueling operations?
• According to NFPA 52, how should composite containers be protected from UV radiation?
• What positioning consideration must be taken for the fuel supply container?
• What does NFPA 52 §7.3.2 require for CNG-related equipment?
• What are Current Licenses related to in CNG activities?
• What is the term for the facility associated with the compression and delivery of natural gas into vehicles at a residence?
• Which of the following materials is prohibited for use in CNG service?
• What is the role of the U.S. Department of Transportation in the natural gas sector?
• Where may CNG examinations take place?
• What authority does AFS have regarding the condition of nameplates on containers?
• Which type of tank is specifically not intended for loading or unloading vehicles?
• What is the role of the NFPA in relation to CNG safety?
• What is the main delivery method for compressed natural gas?
• Which of the following describes a container used to store CNG or LNG?
• What are the implications of failing the CNG examination?
• What should a licensee do if an incident involves both personnel injury and significant gas loss?
• What must be done to adjust external components according to regulations?
• What is a right of entry for inspectors regarding CNG systems?
• What happens if a nameplate on a CNG container is found to be detached or unreadable?
• What does CFR stand for in regulatory terms?
• What pressure should the leak test be equal to at minimum?
• What is maintained by licensees and manufacturers as the most up-to-date set of regulations?
• What constitutes each separate violation for penalty assessment?
• What is liquified natural gas (LNG)?
• What happens if an answer sheet is not completed within the time limit?
• Which of the following serves as the current edition of regulation documents for CNG and LNG?
• A person authorized by the licensee to make changes to operations is known as what?
• What is important to comply with when operating as a CNG Delivery Truck Driver?
• What is indicated by a duplicate nameplate on an ASME container?
• What is the term used for a person who has applied for and received a CNG license from the Commission?
• In what scenario must additional protection for underground piping be provided?
• Which of the following qualifies as an incident requiring reporting?
• What does the Delivery Truck Driver examination qualify an individual to do?
• What does Texas Natural Resources Code, §116.037(e) describe?
• What dictates the standard for the designed operation of regulators?
• Which of the following describes a CNG delivery truck driver’s responsibilities?
• What criteria does "incident reporting" include for CNG-related accidents?
• Which regulatory body oversees CNG operations in Texas?
• What is the primary means of communication for reporting CNG incidents?
• According to regulations, how far must filling connections be from any sources of ignition?
• Which form is required to register a previously unregistered cargo tank unit in Texas?
• What does CNG stand for?
• What is the main purpose of a pressure relief valve in the fueling transfer system?
• Which type of CNG container is used exclusively to propel the vehicle?
• Which of the following is a potential hazard to fuel supply containers?
• What does a modification nameplate indicate?
• What defines a facility as being outdoors in terms of CNG equipment?
• What is the minimum requirement for nameplate thickness on a container?
• How deep must the vertical supports be anchored in concrete?
• Who has the authority to assess penalties for CNG transport violations according to Texas law?
• Which of the following statements is true regarding CNG component installation?
• What is the term for the pressure in a container after the gas temperature has stabilized?
• What vehicle safety aspects are addressed by Texas Natural Resources Code, §116.103?
• What is Maximum Allowable Working Pressure (MAWP)?
• What permission can AFS grant for delays in reporting incidents?
• Where should an emergency manual shutdown device be located in relation to the dispensing area?
• What type of equipment is designed to compress natural gas for storage or dispensing?
• What is the service pressure requirement for shutoff valves?
• What is the necessary requirement for horizontally installed containers?
• What is the time frame for postmarking the CNG Form 1020 after initial notification to AFS?
• What is referred to as the amount of water at 60°F needed to fill a container?
• What type of fee does the military fee exemption apply to?
• Which chapter regulates compressed natural gas in Texas?
• Which feature must the top of vertical supports be anchored into?
• Where should accidents involving CNG be reported to?
• What method is used for the safe and efficient storage of compressed natural gas?
• To prevent container damage, shields must be installed to avoid which of the following?
• What could happen if Operating Pressure exceeds recommended limits?
• What term defines a vehicle adapted for the transportation of CNG?
• What is the maximum allowable period for a trainee to be employed without completing the rules examination?
• What does AFS stand for in the context of CNG operations?
• For containers manufactured before November 1, 1994, what information must still be readable on corroded nameplates?
• Which of the following is true about civil penalties?
• Which type of equipment should be checked for compliance with safety regulations when handling CNG?
• What is the primary purpose of the mobile fuel container?
• What happens if CNG Form 1020 is reported as incomplete?
• What type of unit is required to be registered with AFS?
• Which of the following represents a container designed according to the ASME code?
• Which code pertains specifically to vehicular natural gas fuel systems according to the 2013 edition?
• What requirement is specified for the communication of Pressure Relief Devices?
• What conditions must be met to register or transfer a CNG transport unit?
• Which regulation applies to transport containers built under special permit for CNG transportation?
• What is the minimum strength required for materials used in vertical supports for guardrails?
• When is the connection and disconnection of transfer hoses critical for a CNG delivery truck driver?
• What is the form used for documenting CNG certification?
• What role does the attorney general play according to Texas Natural Resources Code, §116.141(a)?
• Which set of laws governs Delivery Truck Driver operations in Texas?
• What is a consequence of not following the regulations concerning CNG equipment protection?
• During outdoor fueling operations, where should the transfer point be located in relation to buildings and roads?
• What is a Fuel Supply Container used to store?
• What primary factor should be considered when installing CNG system components?
• What must a trainee do if they fail the rules examination?
• What is the requirement for the fencing height if topped with barbed wire?
• If a certificate has expired for more than two years, what must an individual do to renew it?
• Which type of pressure refers to the changing pressure within gas storage containers?
• Which regulations detail the testing and inspection requirements for CNG cargo tanks?
• How should the minimum clearance be assessed for fuel system components?
• What does CNG Form 1007A pertain to?
• In the context of CNG transport, what is the significance of a public hearing?
• What does the term "Transport" refer to in the context of CNG delivery vehicles?
• What is the minimum requirement for road clearance for the fuel system in a CNG delivery truck?
• What action is taken when a transport unit does not comply with safety standards?
• What does the term 'CNG system' NOT include?
• What must fixed electrical equipment and wiring comply with according to safety regulations?
• What is the primary focus of CNG Delivery Truck Driver activities?
• Which document format is typically not preferred for regulatory compliance sharing?
• Hose, flexible metal hose, and tubing must be designed for what conditions?
• What type of regulation is essential for safety in gas pressure vessels?
• What type of incidents do NOT change CNG activity protocols?
• In which position should pressure relief valves on pressure vessels be installed?
• How is fencing located more than 25 feet from a CNG system defined?
• What are the restrictions on the protrusion of fuel supply containers?
• Before use, what must happen to hose assemblies?
• What kind of pressure vessel is designed for absolute pressures exceeding 40 psi?
• What does Texas Natural Resources Code, §116.015 allow?
• What additional feature should pressure relief valves be fitted with?
• What is a characteristic of valves meant to be used as primary stop valves?
• What protection is required for CNG dispensing systems near vehicular traffic?
• What type of material is required for horizontal guardrailing?
• What is one requirement for pressure relief device installation related to environmental factors?
• What form must be completed to replace a damaged CNG Form 1004 decal?
• What do manufacturers need to indicate on the valve body?
• What does NFPA 55 address?
• What type of markings must be present on hoses and metallic hoses?
• What is an essential factor in preventing ignition during CNG dispensing?
• What is required for a trainee while performing CNG activities?
• Which component must meet specifications provided by the cylinder manufacturer for CNG service?
• Which section outlines the specific roles and powers of the attorney general in relation to CNG compliance?
• What is the maximum spacing allowed for vertical supports?
• Which of the following is NOT a function of a mobile fuel system?
• What is a condition during testing that requires immediate removal of the transport container unit from CNG service?
• What is the required characteristic of pipes, tubing, fittings, gaskets, and packing material used in CNG service?
• What type of valve must be used when installing systems involving multiple ASME pressure vessels not in a manifold?
• What is the primary focus of NFPA codes related to gas operations?
• How deep must the uprights, braces, and corner posts be anchored in concrete?
• When can a civil penalty be assessed?
• Which Texas Natural Resources Code section describes the process for declaring vehicles or equipment unsafe?
• What factors does the commission consider when determining penalties?
• What is included in regulations regarding the working pressure of shutoff valves?
• Where can the current edition of the regulations for CNG and LNG be downloaded?
• How should exterior piping be installed to prevent mechanical damage?
• What file format is commonly used for sharing documents while preserving formatting?
• What protective measures should be taken in the presence of stray or impressed currents in dispensing systems?
• What information is NOT allowed to be missing from a container nameplate?
• What is the purpose of the examination related to CNG operations?
• Which of these is a primary component of CNG?
• What is the minimum separation required between CNG containers and aboveground tanks of flammable materials?
• What can individuals request if they fail an examination?
• What must accompany any CNG installation deemed dangerous?
• Which regulatory aspect ensures that pressure relief devices are effective under maximum pressure conditions?
• What type of fencing is required at CNG stationary installations?
• What kind of examination must individuals take to qualify for CNG Delivery Truck Driver activities?
• What does the CNG vehicle labeling indicate regarding the fuel container life?
• What must be equipped on the fill line of a storage container to prevent gas discharge?
• What does CSA B51 relate to in the context of Natural Gas?
• An incident is reported when damages amount to at least what value?
• What safety feature must compression equipment include regarding pressure?
• How can corrosion be inhibited on storage containers?
• What does NFPA 52 regulate?
• Which standard is essential for identifying how pressure relief devices need to be installed?
• What is the main function of the applicable service identifier marked on hoses or pipes?
• What should valves, valve packing, and gaskets be designed to withstand?
• What must be updated after a fuel container inspection?
• What can trigger a requirement for a telephonic notice regarding a CNG incident?
• What is the function of a Fueling Facility Container?
• What is the minimum height requirement for fencing at CNG installations?
• How should shields be installed on fuel supply containers?
• What is the minimum clearance required between fencing and compression equipment?
• What is the function of an Automatic Emergency Shutoff Valve?
• In LNG systems, what is the purpose of a vaporizer?
• What is a Manual Emergency Shutoff Valve primarily used for?
• What is the maximum civil penalty for violations that threaten public safety?
• What is the standard for pressure relief devices specifically for Natural Gas Vehicle fuel containers?
• What is a critical factor when selecting a location for CNG equipment?
• What is required regarding the completion time for the examination?
• What are the state regulations for CNG primarily designed to ensure?
• Which mechanical device increases the pressure and density of a gas?
• Who is responsible for notifying licensees of renewal deadlines?
• What is essential for the safe operation of CNG equipment sheltered by weather protection?
• What is indicated for the installation of safety measures in gas dispensing areas?
• Can regulator protection be integral with the regulator according to NFPA regulations?
• What is the fire extinguisher requirement at the dispensing area for CNG?
• In the event of an incident involving CNG, who must be notified by telephone?
• Which valves should not be used for primary shutoff in CNG systems?
• What is the nonrefundable fee for the management-level rules examination?
• What percentage of CNG loss does not need to be reported?
• What does Compression Discharge Pressure indicate?
• Which entity is responsible for attaching a warning tag?
• Who must train individuals not certified by AFS in safe CNG activities?
• How much CNG can a manufacturer introduce into a newly constructed container for testing purposes?
• Who is responsible for the operation of a CNG transport or container delivery unit?
• What labeling standard must be followed for CNG transport units?
• How often must certificate holders renew their certificates?
• What must individuals do each time they take an examination?
• What does the term Piping refer to in the context of natural gas?
• What is the primary function of a CNG transport vehicle?
• Who is responsible for supervising CNG activities and implementing operational changes according to licensing regulations?
• How long does AFS have to review the CNG Form 1020 after its receipt?
• What type of regulations should CNG Delivery Truck Drivers be familiar with?
• How far must the fueling point be from storage containers during outdoor operations?
• What type of structural support is recommended to protect areas subject to vehicular damage?
• What is the most recent test documentation required for cargo tanks?
• What does the term 'commercial installation' refer to?
• What is Maximum Operating Pressure?
• What does Texas Natural Resources Code, §116.144(a) specify about penalty assessments?
• What condition warrants the use of the hand or emergency brake during CNG transfer?
• Who is identified as the person controlling CNG immediately before its ignition?
• What method is used for discharging gas from containers?
• What status allows individuals to bypass certain examination requirements?
• Which entity requires compliance with additional DOT or motor vehicle requirements?
• Penalties for violations related to CNG transport can only be applied after what condition?
• Where should fuel supply containers be located on a delivery truck?
• What must the storage and compression area be completely enclosed by?
• What material must the uprights, braces, and corner posts of the fence be made from?
• What action must be taken if an unsafe condition is identified during testing?
• What is the official website where NFPA manuals can be ordered?
• What fee must be paid to renew a lapsed certificate annually?
• What form must be filed for a replacement CNG Form 1004 decal?
• Which method is available for administering examinations for CNG?
• What is the requirement for the installation of storage containers according to NFPA 52?
• What are the vertical supports for guardrails required to consist of?
• What is the required registration fee for each transport or container delivery unit with AFS?
• Who is responsible for the information included in the telephonic notice regarding a CNG incident?
• What is required for individuals performing CNG activities?
• Who are Operations Supervisors in a CNG context?
• A disconnect of a hose from equipment that occurs unexpectedly is referred to as what?
• What is the purpose of CNG Form 1004?
• During a transfer operation, venting activities must follow which guideline?
• Which incident requires emergency response according to reporting criteria?
• What action is taken if a violation poses an immediate danger to public health?
• What is a vehicle equipped with CNG cargo tanks used for?
• Which piece of equipment is crucial to ensure natural gas ceases to flow during an emergency pullaway?
• What document must specify the standards for devices fitted to each cylinder?
• What must piping and hose installations account for?
• What defines a Portable Tank in the context of CNG?
• What is the examination retake policy for those who fail?
• What are cards that certify employees for CNG activities called?
• What component is crucial in maintaining safe pressure levels within a gas system?
• What is a CNG installation that dispenses CNG into fuel supply cylinders installed on vehicles called?
• Who ensures that the operations at CNG outlets are running smoothly?
• Which type of pipe is prohibited for use underground?
• What is the time limit for completing the CNG examination?
• What is the minimum burial depth for underground piping?
• What is required by certificate holders to maintain their active status?
• Who is exempt from the examination fee?
• In what form must natural gas be in to be classified as liquified natural gas (LNG)?
• What is the annual renewal fee for certificate holders?
• What must shutoff valves be capable of withstanding?
• What does Texas Natural Resources Code, §116.072(a) pertain to?
• What entity is responsible for enforcing compliance related to CNG transport according to the Texas Natural Resources Code?
• What does ASME Code stand for in relation to safety standards?
• What is the initial report that must be made to AFS after a CNG accident?
• What action must be taken if a licensee discovers an incident involving CNG?
• How far must an emergency manual shutdown device be located from the dispensing area?
• What can an inspector declare about a motor vehicle or CNG/LNG equipment?
• Which of the following describes a replacement nameplate?
• What is the key factor in the design of CNG fuel supply systems?
• What type of container consists of an inner gas-containing component reinforced with an outer layer?
• Cylinders for CNG must comply with which standards?
• What is the most recent year for the regulations for CNG and LNG?
• What is an essential requirement for any CNG cargo tank?
• What type of protection should be provided to halt the flow of natural gas in the event of a pullaway?
• What type of fence must be used to ensure safety at CNG installations?
• What is the nature of the fee associated with taking the CNG examination?
• What describes a CNG system that supplies fuel to an auxiliary engine on a vehicle?
• Which is a key function of marking and tagging CNG hoses and components?
• What should be done with the gate of a fenced enclosure when it is unattended?
• Which of the following is vital to ensuring safety around CNG delivery systems?
• Under what condition is static protection not required during CNG transfer?
• How far must clearance be maintained between fencing and storage containers?
• What fee is required to transfer a currently registered unit?
• What is specifically designed for CNG service?
• Where should vehicle fuel supply containers be mounted to minimize damage?
• What does the acronym DOT stand for?
• Which component is essential for controlling safety during the handling of CNG?
• What is the maximum height for horizontal guardrailing?
• What is NOT a requirement for the examination proctor?
• Where should vehicle fuel supply containers be mounted?
• Which of the following is a criterion for a significant incident?
• What governs the set of rules and standards for CNG activities?
• What is the purpose of a knowledge test in CNG operations?
• Why is understanding Compression Discharge Pressure important for drivers?
• Who is qualified to operate a cargo tank and perform CNG delivery activities?
• Which commission is responsible for regulating CNG and LNG in Texas?
• Where should pressure relief valves discharge according to NFPA 52?
• What must be done to protect underground and aboveground piping?
• What protective measure is required for containers from overhead electrical wiring?
• Which of the following must be printed on the nameplate of a CNG container?
• What must be ensured for letters used in markings on transport units?
• What distinguishes Registered Manufacturers in the CNG sector?
• How is proof of certification typically verified?
• What is the purpose of the ASME nameplate on a container?
• What type of valves should not have removable stems without disassembly of the valve?
• Which material is explicitly not allowed for CNG service components?
• Which of the following is a mobile unit designed to transport LNG or CNG?
• What must not happen if a flat tire occurs in relation to CNG container components?
• According to Texas Natural Resources Code, §116.144(a), when can penalties be assessed?
• What is the maximum charge limit for a CNG cylinder at normal temperature?
• What is required of individuals upon request from Commission employees or agents?
• What is the main characteristic of an Automatic Emergency Shutoff Valve?
• What is required to register a transport unit for CNG service with AFS?
• What type of valve is used to control the discharge of gas from high-pressure systems?
• What is required for an incident that results in unintentional gas ignition?
• What is the primary purpose of a breakaway device in a CNG delivery system?
• Who is considered a Qualified Individual in the context of CNG?
• What is required to protect fuel supply containers from damage?
• Which form is specifically for the registration of an unregistered container delivery unit?
• What is the status of a unit that was previously registered in Texas but has not been renewed?
• Which standard outlines the general pressure relief device standards for compressed gases?
• What is the consequence of non-compliance with safety regulations?
• What is the primary regulation regarding the introduction of CNG into containers?
• What standard must pressure vessels comply with according to the regulations?
• Which incident necessitates reporting to AFS regardless of location?
• What is required for emergency shutdown devices to ensure they are easily recognizable?
• Who is authorized to perform operations involving venting of CNG?
• What information is required in the telephonic notice for incidents?
• Who is considered a certificate holder in the context of CNG?
• What is used to lock the electric control for compressors to prevent unauthorized withdrawal of CNG?
• How can individuals or companies request the scheduling of examinations?
• What is the minimum burst pressure requirement for hose and metallic hose in CNG applications?
• What is required for nameplates attached to containers after installation?
• What is a Dispensing Station used for?
• What does AFS notify individuals what happens if they miss the renewal deadline?
• What is the force requirement for a breakaway device to separate during an incident?
• What is the purpose of leak testing piping, tubing, and hose assemblies?
• According to regulations, how should DOT, TC, and ANSI/IAS NGV2 cylinders be charged?
• What safety measures must be taken during the transfer of CNG to or from cargo vehicles?
• Which situation necessitates reporting an incident involving CNG during transfer?
• Which standard addresses the integrity of compressed natural gas fuel containers?
• Which type of registration allows manufacturers to perform CNG activities?
• What is the primary reason for protecting the operating end of CNG containers and related equipment?
• What safety measure is commonly associated with Maximum Allowable Working Pressure (MAWP)?
• What is marked on each side and the rear of CNG transports and container delivery units?
• What type of lettering is required for markings on transport units?
• What is the function of a pressure relief device in a CNG system?
• What measures should be taken to protect container valves?
• Which action must the AFS take if a CNG cylinder is deemed an immediate danger?
• What is the primary function of a Trainee in the context of CNG delivery?
• How often should pressure relief valves be tested according to safety regulations?
• What material is required for nameplates on ASME containers manufactured after November 1, 1994?
• How should vehicle structures be utilized in relation to CNG valves?
• What is the purpose of the pressure relief valve mentioned in NFPA 52?
• Which type of valve must have a closing flow greater than the maximum system design flow rate?
• What is the AFS Training Center known for?
• What must be obtained before painting composite containers?
• Which organization is responsible for sending certificates to licensees or individuals?
• Which addenda describes enhancements for the pressure relief devices for NGV fuel containers?
• Which of the following is NOT included on a container nameplate?
• Which types of licensees can determine the safety of transport for CNG services?
• What is a requirement for every cylinder in a CNG vehicle?
• What is a Cargo Transport Container specifically designed for?
• What incident involves reporting to AFS if it results from an accident?
• CNG cylinders must be marked and tested according to which code?
• What type of transport unit is designed for delivering CNG?
• What does the abbreviation CNG stand for?
• What action can the attorney general take upon request of the commission?
• What role do Company Representatives play in CNG operations?
• What happens if an individual fails the CNG examination?
• What is the purpose of automatic shutdown control in CNG systems?